Greenham Signs Catalogue 2025

EMERGENCY ESCAPE SIGNS

ISO 16069:2017 describes the principles governing the design and marking for Safety Way Guidance Systems. In addition to the requirement for installing exit signs at 1.7m - 2.2 metres from the ground, this standard recommends that additional intermediate and low location markings may also be required. Position at a maximum height of 400mm from the floor for low level marking. Subject to a full risk assessment, additional escape guidance should be provided through the use of both continuous guidance lines and safety signs to ensure there is an uninterrupted safety sign system to aid an efficient and safe evacuation from a building. Fire fighting equipment, hazards along an escape route, boundaries, stairs and ramps should also be identified. INTERMEDIATE MARKERS

3 2150 4 2150

3 2151 4 2151

3 2152 4 2152

3 2153 4 2153

3 2154 4 2154

3 2155 4 2155

XV XV

XV XV

XV XV

XV XV

XV X

XV X

FLOOR GRAPHICS

This range of floor graphics are sub surface printed and over laminated in hard wearing anti-slip polycarbonate film. Ideal to help highlight key emergency escape locations.

400 x 200mm 5 8809

600 x 200mm 5 8815

600 x 200mm 5 8813

You can find our full range of floor graphics on pages 64 - 65. ADDITIONAL FLOOR GRAPHICS

400 x 600mm 5 8823

400 x 600mm 5 8826

600 x 200mm 5 8811

600 x 200mm 5 8807

DOOR PLATES

Visible from different angles, projecting signs help quick identification of exit or fire exit routes. Includes drilling guide for simple installation. Designed to conceal fixings for a neat finish. PROJECTING SIGNS

75 x 300mm

Manufactured from Photoluminescent Rigid Plastic and are complete with a self adhesive backing. Plates should be installed to reinforce the exit message. They should not be installed instead of an exit/fire exit sign above the door.

Rigid Plastic Rigid Photolum Face: 150 x 200mm

Rigid Plastic Rigid Photolum Face: 150 x 200mm

5 8005 5 8008

5 8006 5 8007

5 8236

5 8230

5 8231

5 8232

5 8233

PHOTOLUMINESCENT SAFETY TAPES 10 Metre Roll - Self Adhesive Vinyl - Perfect for highlighting door frames and / or the location of fire fighting equipment.

40mm width 80mm width

5 8647 5 8648

40mm width 80mm width

5 8641 5 8642

40mm width

5 8644

20mm width 40mm width 80mm width

5 8658 5 8659 5 8660

40mm width 80mm width

5 8653 5 8654

40mm width 80mm width

5 8650 5 8651

40mm width 80mm width

5 8656 5 8657

Aluminium backed anti-slip floor graphics provide extra durability in high traffic areas. DELUXE CLASS D FLOOR MARKERS

CLASS C FLOOR MARKERS An effective method of marking escape routes. These markers have an anti-slip surface and strong adhesive backing.

Pack of 20 75 x 75mm 5 8670

Pack of 20 240 x 90mm 5 8672

Pack of 20 75mm Dia. 5 8671

Pack of 6 80mm Dia. 5 3523

Pack of 6 80mm Dia. 5 8304

Pack of 6 80mm Dia. 5 8305

125mm Dia. 5 8664

175 x 110mm 5 8665

90mm Dia. 5 8663

EMERGENCY LIGHTING FASCIAS

SELF ADHESIVE OVERLAY This overlay enables you to tear-off symbols and text and place over emergency lighting. Choose clear version for fluorescent bulbs or white vinyl for LED light units.

Replace the front of an emergency light with an ISO 7010 compliant graphic

When ordering please state the height and width dimensions, wording and the arrow direction you require. e.g. 58308, 400 x 200mm, Fire Exit Up 2mm Opal Acrylic 5 8308

Clear 5 8302

White Vinyl 5 8301

MATERIAL CODES 1 Rigid Plastic 2 Self Adhesive Vinyl

C F 150 x 150mm 200 x 200mm LANDSCAPE SIZES

PORTRAIT SIZES 150 x 200mm 250 x 300mm E H

3 Photoluminescent Rigid Plastic 4 Photoluminescent Self Adhesive

5 Miscellaneous

300 x 100mm 300 x 250mm

400 x 200mm 450 x 150mm

600 x 200mm 300 x 150mm

200 x 100mm 300 x 200mm

200 x 300mm Y

G H2

J L

M V

X Y

21